There are a few terms you may need to know. Speed Strips and the QuickStrips are both loading strips. We fill the loading strip. We reload the revolver. We fill the loading strip. The rounds are held in the loading strip’s holding holes. There is a flange tab on one end of the loading strip. Remember to practice with dummy rounds until you feel comfortable with the techniques.  Always train in a safe area and always keep your muzzle in a safe direction.

The first loading strip skill to know is how to fill them. Start with an empty loading strip. Position the loading strips diagonally across your left hand’s index finger.  Position the pad of your left index finger directly underneath the first loading hole. Keep the Loading strips in place by pinching one end of the Loading strips between the thumb and middle finger of your left hand.

Hold the cartridge to be loaded in the fingers of your right hand. While canting the base of the cartridge insert the edge of the rim into the holding hole.

Once the edge of the rim is in the holding hole, lever the remaining portion of the rim into the holding hole.  Move to the next holding hole and repeat until you have filled the Loading strips.

X